Bow riser

3D printable bow riser.

I have made it to print it in my Anycubic Kossel Linear plus. Round build plate 27 cm, 30 cm high.

Riser is separated for 3 parts and can be screwed with 2 bolts.
More info on the photos.

For better durability, I recommend wrapping it with Scotch tape (it can also be another product that stiffens well)

Bow limbs can be cut from plywood, and cutting templates will be provided after some time when it will be ready.

Licence info:
If you decide to use it for commercial purposes my logo cannot be removed and link to my store or my Instagram portfolio has to be provided with it. (you can find me on cults3d.com 4kDesignStudio)

Advise for FDA printers:

Infill density - 35%
Layer height - 0,2 mm

I printed with support density 10% but if you are more experienced you can use your own setup. (some cleaning needed after printing)

I advise laying it flat on the build plate with front or back side upwards (sides keep sideways)
In this setup printing, layers will be working for bending. If you will print it vertically then object could be easily broken during usage.

Remember, it is only a toy and can only be used as such.